Regulator Sash

Remove or Disconnect

1. Door trim panel. Detach inner panel water deflector enough to gain access to window regulator sash bolts.
2. With window in raised position tape glass to upper frame. Remove sash bolts.
3. Lower regulator sash to full-down position and remove by twisting 90 degrees and pulling outboard.

Install or Connect

1. Regulator sash.
2. Sash bolts.

Tighten
^ Bolts to 7 N.m (62 lb. in.).

3. Inner panel water deflector.
4. Door trim panel.
5. Tape from window.