With Keyless Entry

All Door Locks operate the same as without Keyless Entry except the LH Door Lock. When either Door Lock Switch is moved to the "LOCK" position, the Door Lock Relay is energized and voltage is applied to the CKT 295 wire and to the Door Lock Actuators. The LH Front Door Lock Actuator is grounded through the Remote Control Door Lock Receiver (RCDLR) CKT 694. The other Door Lock Actuators are grounded through the normally open contacts of the Unlock Relay. When either Door Lock Switch is moved to the "UNLOCK" position, voltage is applied to CKT 694 of the (RCDLR). This is the Unlock Enable signal that tells the (RCDLR) to energize CKT 694 unlock the LH Front Door Lock Actuator. The LH Front Door Lock Actuator is then grounded through the normally open Lock Relay contacts of the Door Lock Relay.