Trunk Lid Pull-Down

Voltage is applied at all times from relay center fuse #1 to the trunk lid pulldown terminal A. Opening the trunk lid moves the trunk lid pull-down switch to the OPEN position and the trunk lid latch switch to the UNLATCHED position. The pull-down striker switches are in the STRIKER REATTACHED position. (See schematic.) Voltage is applied through striker switch #2 to the pull-down motor. The motor is grounded through striker switch #3 and the trunk lid pull-down switch (terminal D). The motor drives the striker up; once the striker is fully extended, the striker switches move to the STRIKER EXTENDED position.

When the trunk lid is closed, the trunk lid pull-down switch moves to the CLOSED position and the trunk lid latch switch moves to the LATCHED position. The pull-down striker switches are in the STRIKER EXTENDED position. Voltage is applied through striker switch #2 to the pull-down motor. The motor is grounded through striker switch #1 (terminal B) and the trunk lid-latch switch. The motor drives the striker down to the retracted position (pre-opening position). When the striker is fully retracted, the striker switches move to the STRIKER RETRACTED position.