Installation

Front Cover:

INSTALL OR CONNECT

NOTE: Crankshaft sensor requires no adjustment.

1. Gasket at cylinder block.
2. Front cover and attaching bolts.
- Apply sealant GM P/N 1052080 or equivalent to bolt threads.
- Tighten bolts to 30 Nm (22 lbs. ft.).
3. Oil pan to front cover bolts.
- Tighten to 14 Nm (124 lbs. in.).

Fig. 6 Crankshaft Sensor Adjustment:

4. Crankshaft sensor. Adjust crankshaft sensor using tool No. J37087, or equivalent, as shown in image.
5. Sensor shield.
6. Balancer and bolt.
- Tighten balancer bolt to 150 Nm (111 lbs. ft.) +76°.
7. Drive belt(s).
8. Torque axis mount.
- Tighten bolt to 87 Nm (65 lbs. ft.)