Troubleshooting Hints - Indicator Cluster

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. Check I/P Fuse Block Fuses 1A, 9C, 1D and 5A by visual inspection.
2. Check indicator bulbs.
3. If more than one indicator or gage is out, check common power and ground inputs.
4. Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check. (Refer to General Troubleshooting Procedures) Diagnostic Aids
5. Check for proper installation of aftermarket electronic equipment which may effect the integrity of other systems. (Refer to General Troubleshooting Procedures).