Memory Seats and Mirrors

Each transmitter can be programmed to allow memory seat and mirrors to activate:

^ Memory Position # 1

^ Memory Position # 2

^ Exit Position

^ Turn Off Feature

To program the system, perform the following steps:

1. Set the seat and mirrors to a comfortable position.

2. Press the SET button on the memory seat controls (you will hear a single beep).

3. Press the desired position within 5 seconds (position # 1, # 2, or exit) (you will hear a single beep).

4. Press the UNLOCK button on the appropriate transmitter within 5 seconds (you will hear 2 beeps).

To turn off the feature, skip Step 3.

Once a transmitter has been programmed to the selected positions, any changes to those positions will require updating the seat function (Steps 2 and 3).