Pull Down System

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
^ Rear Compartment Lid Lock must securely lock to Striker for proper operation of Pull-Down Unit.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to General Troubleshooting Procedures). Diagnostic Aids

^ Refer to System Diagnosis.