Power Reclining Seat(S)

Battery voltage from I/P Circuit Breaker #1 is applied to the Driver Seat Recliner Switch and the Passenger Seat Recliner Switch through CKT 2240. The Recliner Switches, which are grounded at G201, normally ground both sides of the Recliner Motors. When the Recliner Switch is moved to the "BACK" position, battery voltage is applied to the Recliner Motor through the LT BLU wire and the Recliner Switch. The motor will rotate to move the seatback back. The Recliner Motor will be grounded through the LT GRN wire.

When the Recliner Switch is moved to the "FORWARD" position, battery voltage is applied to the Recliner Motor through the LT GRN wire. The Recliner Motor will be grounded through the LT BLU wire and the Recliner Switch. The Recliner Motor will rotate in the opposite direction and move the seatback forward.