Front Hub and Bearing

FRONT WHEEL BEARINGS AND/OR HUB

Tools Required:
- J 28733-A Front Hub Spindle Remover
- Or Equivalent





REMOVAL

1. Drive axle.
2. Brake caliper bolts, and support caliper.
3. Rotor.
4. Hub and bearing assembly from steering knuckle.

INSTALLATION

1. Hub and bearing assembly to steering knuckle.
2. Hub and bearing assembly bolts.

Tighten
Tighten hub and bearing assembly bolts to 95 Nm (70 lb ft).

3. Rotor.
4. Brake caliper and bolts.
5. Drive axle.
6. Check front wheel alignment.