System Check - Restricted Exhaust

Restricted Exhaust System Check:

Restricted Exhaust System Check:

System Description

Proper diagnosis for a restricted exhaust system is essential before any components are replaced. Using the Restricted Exhaust System Check table should determine if the exhaust system is restricted. The best place for checking the exhaust system is at the 02S 1 location. Once the test is completed, coat threads with anti-seize compound P/N 5613695 or equivalent prior to 02S re-installation.


Test Description

Number(s) below refer to the step number(s) on the Diagnostic Table.

3. The exhaust system under normal conditions has very low back pressure. If the exhaust system is restricted, a noticeable increase in exhaust pressure is noticed on the gage.

4. If no high back pressure is found at idle, increasing the engine speed to 3000 RPM may find a slight restriction. The added engine speed increases the exhaust flow which will help determine if there is a slight restriction.