Troubleshooting Hints - With Center Console

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
1. Check PRNDL Fuse by visual inspection.
^ Refer to Electronic PRNDL Control Module Access.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check (refer to Diagnostic Aids for General Troubleshooting Procedures). Diagnostic Aids
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to Diagnostic Aids for General Troubleshooting Procedures). Diagnostic Aids
^ Refer to System Diagnosis.