Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • Electrical - MIL ON/DTC's Set By Various Control Modules
  • Engine, A/T - Shift/Driveability Concerns/MIL ON
  • Electrical - SES Lamp ON/Driveability/No Start/DTC's Set
  • PROM - Starter Motor Cranks Right After PCM is Replaced
  • Instruments - Cluster Resets When Ham Radio Is Keyed
  • Instruments - Fuel Gauge Inaccurate/Fluctuates
• By Symptom
  • Abnormal wear/deterioration
    • Electrical - MIL ON/DTC's Set By Various Control Modules
    • Electrical - SES Lamp ON/Driveability/No Start/DTC's Set
  • Customer Interest
    • Electrical - MIL ON/DTC's Set By Various Control Modules
    • Engine, A/T - Shift/Driveability Concerns/MIL ON
    • Electrical - SES Lamp ON/Driveability/No Start/DTC's Set
    • PROM - Starter Motor Cranks Right After PCM is Replaced
    • Instruments - Cluster Resets When Ham Radio Is Keyed
    • Instruments - Fuel Gauge Inaccurate/Fluctuates
  • Driveability
    • Engine, A/T - Shift/Driveability Concerns/MIL ON
  • Erratic Operation
    • Instruments - Cluster Resets When Ham Radio Is Keyed
  • Erratic Shifting
    • Engine, A/T - Shift/Driveability Concerns/MIL ON
  • False instrument warning light/gauges
    • Instruments - Cluster Resets When Ham Radio Is Keyed
    • Instruments - Fuel Gauge Inaccurate/Fluctuates
  • Starting problems
    • PROM - Starter Motor Cranks Right After PCM is Replaced
  • Won't turn off
    • PROM - Starter Motor Cranks Right After PCM is Replaced
• All Technical Service Bulletins
  • Engine - THIS BULLETIN HAS BEEN CANCELED
  • Electrical - MIL ON/DTC's Set By Various Control Modules
  • A/T Control - DTC P0756 Diagnostic Tips
  • Engine, A/T - Shift/Driveability Concerns/MIL ON
  • Emissions - OBDII I/M Readiness Testing
  • Engine Controls - MIL Function During I/M Testing
  • Accessories - DTC's P0300, P1380, P1381
  • Electrical - Harness Connection Inspection
  • Electrical - SES Lamp ON/Driveability/No Start/DTC's Set
  • Emissions - OBD II Retrofit Program
  • Engine Controls - Revised DTC P0101
  • A/T Controls - Revised Text for all DTC Tables
  • EVAP System - Monitor Strategy
  • A/C - DTC Diagnosis
  • PCM - Returned Product Feedback Program
  • A/T - Service Manual Updates
  • PCM - New Identification Label
  • PROM - Starter Motor Cranks Right After PCM is Replaced
  • PCM Connector - Information on New Service Kits
  • PROM - Reprogram Using Off Board Program Adapter
  • Instruments - Cluster Resets When Ham Radio Is Keyed
  • Oxygen Sensor - Locations in Various Exhaust Systems
  • BCM - Body Control Module Replacement Procedure Revised
  • Instruments - Fuel Gauge Inaccurate/Fluctuates
  • Fuel Level Sensor - Replacement Procedure