Coasting Downshifts

COASTING DOWNSHIFTS
1. With the gear selector in Overdrive (D4), accelerate to 4th gear with the TCC applied.
2. Release the accelerator pedal and lightly apply the brakes. Observe the following results:
- The TCC releases.
- Downshifts occur at speeds shown on the Shift Speed Chart. Specifications

MANUAL THIRD (D3)
With the vehicle stopped, move the gear selector to Third (D3) and accelerate in order to observe the following conditions:
- The 1-2 shift
- The 2-3 shift

MANUAL SECOND (D2)
1. With the vehicle stopped, move the gear selector to second (D2) and accelerate in order to observe the 1-2 shift.
2. Accelerate to 40 km/h (25 mph) and observe the following conditions:
- The 2-3 shift does not occur
- The TCC does not apply

MANUAL FIRST (D1)
With the vehicle stopped, move the gear selector to First (D1). Accelerate to 24 km/h (15 mph) and observe the following conditions:
- No upshifts occur
- The TCC does not apply
- The 1-2 and 2-3 Shift Solenoid valves must be ON

REVERSE (R)
With the vehicle stopped, move the gear selector to Reverse (R) and slowly accelerate to observe the following conditions:
- The 1-2 Shift Solenoid valve is ON
- The 2-3 Shift Solenoid valve is ON