Alarm

Alarm Security TT Box (Part 1 Of 2):

Alarm IGN1 Box (Part 2 Of 2):

When in the Content Theft Deterrent (CTD) Alarm mode, the Remote Function Actuator (RFA) subsystem has the above characteristics

The CTD subsystem will remain in the Alarm mode until one of the following conditions occurs:
1. If the RFA receives a valid Unlock Driver Door command from the Keyless Entry Transmitter or a Lock Cylinder State Report indicating key in the unlock position, the CTD will enter the Standby mode.
2. After the CTD subsystem has been in the Alarm mode for 30 seconds, one of the following conditions will become valid:
^ If the CTD subsystem has been in the Alarm mode at least five times since it has been in the Standby mode, the CTD subsystem will enter the Alarm Off mode.
^ The CTD subsystem will enter the mode corresponding to the conditions of the table as above.

All doors must be closed for doors to be considered inactive.