Door Armed

Door Armed Security TT Box:

The Door Armed mode is where the alarm is only sensitive to door inputs. Other alarm inputs are ignored or serve to promote the Remote Function Actuator (RFA) subsystem to a higher alarm sensitivity. When in the Content Theft Deterrent (CTD) Standby mode, the RFA subsystem has the above characteristics

The CTD subsystem will remain in the Door Armed mode until one of the following conditions occurs:
1. If IGN1 or ACC1 is in an inactive state, the CTD will go into the Ignition and Door Armed mode
2. If the RFA receives a valid Unlock Driver Door command from the Keyless Entry Transmitter, a Lock Cylinder State Report indicating key in the unlock position, the CTD will enter the Standby mode.
3. If one door jamb switch shows a door open, the CTD will enter the Alarm mode.