Ignition Armed

Fully Armed Security TT Box:

The Ignition Armed mode is a state where the Content Theft Deterrent (CTD) is sensitive only to Ignition input. Other alarm inputs are ignored or serve to promote the Remote Function Actuator (RFA) subsystem to a higher alarm sensitivity condition. When in the CTD Ignition Armed mode, the RFA subsystem has the above characteristics

The CTD subsystem will remain in the Ignition Armed mode until one of the following conditions occurs:
1. IGN1 or ACC1 goes to an active state, putting the CTD into the Alarm mode
2. If the RFA receives a valid Unlock Driver Door command from the Keyless Entry Transmitter, a Lock Cylinder State Report indicating key in the unlock position, the CTD will enter the Standby mode.
3. If one door jamb switch shows a door open, the CTD will enter the Ignition and Door Armed mode.