Ignition and Door Armed

Ignition Door Armed Security TT Box:

The Ignition and Door Armed mode is where the alarm is sensitive to all alarm inputs. When in the Content Theft Deterrent (CTD) Ignition and Door Armed mode, the Remote Function Actuator (RFA) subsystem has the above characteristics

The CTD subsystem will remain in the Ignition and Door Armed mode until one of the following conditions occurs:
1. IGN1 or ACC1 goes to an active state, putting the CTD into the Alarm mode
2. If the RFA receives a valid Unlock Driver Door command from the Keyless Entry Transmitter, a Lock Cylinder State Report indicating key in the unlock position, the CTD will enter the Standby mode.
3. If one door jamb switch shows a door open, the CTD will enter the Alarm mode.