Reset Armed

Reset Armed Security TT Box:

The Content Theft Deterrent (CTD) Reset Armed mode is where the Remote Function Actuator (RFA) subsystem is not sensitive to any alarm inputs. This mode waits until one of the alarm inputs goes inactive, and then promotes the CTD to an armed state which monitors that input. When in the CTD Reset Armed mode, the RFA subsystem has the above characteristics

The CTD subsystem will remain in the Reset Armed mode until one of the following conditions occurs:
1. IGN1 or ACC1 goes to an inactive state, the CTD will go into the Ignition Armed mode
2. If the RFA receives a valid Unlock Driver Door command from the Keyless Entry Transmitter, a Lock Cylinder State Report indicating key in the unlock position, the CTD will enter the Standby mode.
3. If the door jamb switches show all doors closed, the CTD will enter the Door Armed mode.