Standby

Standby Security TT Box:

The Standby Mode is the Remote Function Actuator (RFA) state following any valid unlock situation. When in the Content Theft Deterrent (CTD) Standby mode, the theft subsystem has the characteristics as above.

One way the CTD can enter Standby mode is by the loss, and subsequent re-application, of BATTERY power. The CTD subsystem will remain in Standby mode until:
1. IGN1 or ACC1 goes to an active state, putting the CTD into the Ignition ON mode
2. If at least one door jamb switch shows a door open, the CTD will enter the Pulsed Telltale mode.
3. If the RFA receives a valid Lock All Doors command from the Keyless Entry Transmitter, with IGN1 and ACC inputs and Retained Accessory Power (RAP) mode inactive, the CTD will enter the Delay mode.