Telltale on

Telltale ON Security TT Box:

The Telltale On Mode is a transition mode between the Pulsed Telltale Mode and other modes. When in the Content Theft Deterrent (CTD) Telltale ON mode, the Remote Function Actuator (RFA) subsystem has the above characteristics

The CTD will remain in the Telltale ON mode until one of the following occurs:
1. IGN1 or ACC1 goes to an active state, putting the CTD into the Ignition ON mode
2. If the door jamb switches show all doors closed and Last Door Closed Locking (LDCL) is not active, the CTD will enter the Delay mode. If LDCL is active, the CTD will remain in the Telltale ON mode until LDCL has completed before entering the CTD Delay mode.
3. If the RFA receives a valid Unlock Driver Door command from the Keyless Entry Transmitter, a Lock Cylinder State Report indicating key in the unlocked position, or an Unlock Switch Active report, the CTD will enter the Pulsed Telltale mode.
4. Ten minutes has passed, when the CTD will turn off the security telltale and continue to monitor the conditions above to determine the next state.