Oil Pump: Service and Repair

REMOVAL
1. Remove the front cover.
2. Remove the oil filter adapter.
3. Remove the pressure relief valve and spring.
4. Remove the oil pump cover screws.
5. Remove the oil pump cover.
6. Remove the oil pump gears.

INSTALLATION
1. Lubricate the gears with petroleum jelly.
2. Install oft pump gears.
3. Pack the cavity with petroleum jelly.
4. Install oil pump cover.
5. Install oil pump cover screws. Tighten the screws to 11 Nm (98 inch lbs.).
6. Install oil filter adapter.
7. Install front cover.