HVAC Programmer

HVAC Programmer Mounting Bracket:

HVAC Programmer:

Remove or Disconnect

1. Negative battery cable.
2. Right sound insulator.
3. I/P compartment.
4. Electrical connectors from programmer.
5. Retaining tabs from programmer.
6. Programmer.

Install or Connect

1. Programmer into retainer on bracket.
2. Electrical connectors to programmer.
3. I/P compartment.
4. Right sound insulator.
5. Negative battery cable.

Important
^ After the programmer has been replaced, the actuators need to be recalibrated for proper travel.

The ignition must be cycled ON for 3 minutes to allow the programmer and the actuators to recalibrate for proper travel.