Turn Signal Operation

Turn signal lamps are combined with the parking lamps in front and, though it is part of the taillamp, there are separate bulbs for the turn signal function in the rear. The ignition switch must be in RUN for the turn signal lamps to operate.

The lane-change turn signal feature is standard equipment. When making a partial turn, such as when changing lanes, the driver has the option of moving the multi-function turn signal lever to a detent stop. The signal lamps flash as long as the lever is held in this position and cancels automatically when the lever is released. By using the detent position. a shallow turn to lane change can be signaled without the possibility of failure to cancel. Moving the multi-function turn signal lever past the detent position to its travel limit in either direction provides conventional turn signal operation.