Balance Shaft

End Play: 0.0-0.203 mm (0.0-0.008 inches)
Radial Play-Front: 0.0-0.028 mm (0.0-0.0011 inches)
Radial Play-Rear: 0.0127-0.119 mm (0.0005-0.0047 inches)
Drive Gear Lash: 0.050-0.127 mm (0.002-0.005 inches)
Bearing Bore Diameter-Front: 51.973-51.999 mm (2.0462-2.0472 inches)
Bearing Bore Diameter-Rear: 49.530-49.580 mm (1.950-1.952 inches)