Rear Body Mount

REMOVE OR DISCONNECT
1. Raise vehicle.
2. Tires and wheels.
3. Using a block of wood at least 7 inches long, support exhaust and rear of support assembly.
4. Four exhaust hangers.
5. Two rear support assembly bolts and lower support assembly and exhaust together.
6. Two Bolts and rear body mount.

INSTALL OR CONNECT
1. Rear body mount and two bolts ensuring "OUT" is toward outboard of vehicle.
^ Tighten bolts to 51 Nm (38 lb ft).
2. Raise support assembly and exhaust.
3. Two bolts securing support assembly to body of vehicle.
^ Tighten bolts to 165 Nm (122 lb ft).
4. Four exhaust hangers.
5. Tires and wheels.
^ Tighten wheel nuts to 140 Nm (100 lb ft).
6. Lower vehicle.