Trim Panel

Door Trim Panel - Front:

Remove or Disconnect

1. Door handle trim plate.
2. Arm rest cover plate.
3. Two screws from arm rest.
4. Courtesy lamp assembly.
5. Screw from behind lamp assembly.
6. Push pin fastener from defroster duct.
7. Trim panel by lifting up on trim panel to disengage hooks on backside of panel.
8. Electrical connector and door lock cable.

Install or Connect

1. Electrical connector and door lock cable.
2. Trim panel by engaging hooks on backside of panel.
3. Push pin fastener in defroster duct.
4. Screw from behind lamp assembly.
5. Courtesy lamp assembly.
6. Two screws in arm rest.
7. Arm rest cover plate.
8. Door handle trim plate.