Balance Shaft: Specifications

DIMENSIONS
End Play 0.0-0.203 mm (0.0-0.008 inches)
Drive Gear Lash 0.050-0.127 mm (0.002-0.005 inches)
Radial Play
Front 0.0-0.028 mm (0.0-0.0011 inches)
Rear 0.0127-0.119 mm (0.0005-0.0047 inches)
Bearing Bore Diameter
Front 51.973-51.999 mm (2.0462-2.0472 inches)
Rear 49.530-49.580 mm (1.950-1.952 inches)

TIGHTENING SPECIFICATIONS
Gear Bolt 22 Nm (16 ft. lbs.)+70°
Retainer Bolt 30 Nm (22 ft. lbs.)