Access Cover: Service and Repair

REMOVAL
1. Twist counter-clockwise to unlock the tube/oil fill cap from the valve rocker arm cover.
2. Lift the fuel injector sight shield up at the front and slide the tab out of the engine bracket. Refer to Engine Cover Replacement Service and Repair.
3. Replace the tube/oil fill cap in the valve rocker arm cover.

INSTALLATION
1. Remove the tube/oil fill cap from the valve rocker arm cover.
2. Insert the tab of the fuel injector sight shield under the engine bracket.
3. Place the hole of the fuel injector sight shield onto the oil fill neck of the valve rocker arm cover.
4. Install the tube/oil fill cap into the valve rocker arm cover and twist clockwise in order to lock.