Left Instrument Panel Insulator

Description:

Tool Required:
J 38778 Door Trim Pad and Garnish Clip Remover

Remove or Disconnect
1. Push-in retainers from the left instrument panel insulator using J 38778.
2. Courtesy lamp from left instrument panel insulator.
3. Pull left instrument panel insulator forward from stud at accelerator pedal.
4. Left instrument panel insulator from instrument panel.

Install or Connect
1. Left instrument panel insulator to instrument panel.
2. Courtesy lamp to instrument panel insulator.
3. Position left instrument panel insulator to stud at accelerator pedal.
4. Push-in retainers to the left instrument panel insulator.
5. Push up on left forward side of left instrument panel insulator to locate to ledge in dash mat.