Remote Unlock Verification Customization

Remote Unlock Verification Customization Table:

METHOD 1 - NO TOOLS REQUIRED

Important: If the ignition switch is moved to the "OFF" position or any vehicle door is opened during this procedure, the remote unlock verification customization will he terminated and the system will remain in the most recent mode.

1. Sit in the vehicle driver's seat.
2. Close all of the vehicle's doors.
3. Turn the ignition to the "RUN" position.
4. Press and HOLD the door "LOCK" switch to the "Unlock" position.
5. Press the transmitter "UNLOCK" button. The chime will bong one to four times, equal to the current customization mode, to indicate which mode the vehicle is in. Each additional time the transmitter UNLOCK" button is pressed, the mode number will advance. A transition past mode four will repeat starting again at mode one.
6. Release the door "LOCK" switch from the "Unlock" position when the desired mode has been indicated by the chime.
7. Turn the ignition to the "OFF" position.

METHOD 2 - SCAN TOOL REQUIRED
The following procedure describes how to customize the remote unlock verification feature using the Tech 2 (R). This procedure may also be accomplished by using an equivalent scan tool.
1. Connect the scan tool to an applicable power source and the vehicle Data Link Connector (DLC).
2. Turn the ignition to the "ON" position.
3. At the "Application Menu" screen, select "F5" (personalization).
4. At the "Personalization Main Menu" screen, select "F0" (set options).
5. At the Set Options Main Menu" screen, select "F2" (verify unlock mode).
6. After reading the "Setting Options" screen, select "Done".
7. At the "Set Options" screen, use the up and down arrow buttons to move the highlighter to the desired option (mode).
8. Select "Activate Options", then select "Save Options".
9. Press "Exit" repeatedly until the "Application Menu" screen is viewed.
10. Disconnect the scan tool from the accessory power port and the vehicle DLC.
11. Validate that the option (mode) selected was activated by operating that system.