Brake Pedal Reinforcement Bracket

REMOVE OR DISCONNECT
1. Instrument panel carrier.
2. Brake pedal bracket.





3. Brake Booster.





4. Brake pedal reinforcement bracket mounting nuts front of dash.
5. Brake pedal reinforcement bracket.

Inspect
- All parts for wear. Repair or replace as needed.

INSTALL OR CONNECT

NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application. the manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage to parts and systems.








1. Brake pedal reinforcement bracket.
2. Brake pedal reinforcement bracket mounting nuts front of dash.
- Tighten nut to 50 Nm (37 ft. lbs.)
3. Brake Booster.
4. Brake pedal bracket.
5. Instrument panel carrier.

Adjust





- Stoplamp switch.