Parking Brake Actuator

REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Tire and wheel.
3. Brake rotor.
4. Loosen brake cables at equalizer.
5. Cable from actuator lever.
6. Parking brake return spring.
7. Cable from parking brake bracket
8. Parking brake bracket from support plate.
9. Parking brake actuator.
10. Rear wheel hub.
11. Parking brake shoe and lining.

INSTALL OR CONNECT
1. Parking brake shoe and lining.
2. Rear wheel hub.
3. Parking brake actuator.
4. Parking brake bracket to support plate bolts. Tighten bolts to 10 Nm (89 inch lbs.).
5. Parking brake return spring.
6. Cable to parking brake bracket.
7. Cable to actuator lever.
8. Tighten nut on equalizer to remove cable slack.
9. Brake rotor.
10. Tire and wheel.
11. Lower vehicle and adjust