Parking Brake Support Plate

REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Tire and wheel.
3. Brake rotor.
4. Loosen brake cables at equalizer.
5. Cable from actuator lever.
6. Parking brake return spring.
7. Cable from parking brake bracket.
8. Parking brake bracket from support plate bolts.
9. Parking brake actuator.
10. Rear wheel hub.
11. Parking brake shoe and lining.
12. Parking brake support plate.

INSTALL OR CONNECT
1. Parking brake support plate.
2. Parking brake shoe and lining.
3. Rear wheel hub.
4. Parking brake actuator.
5. Parking brake bracket to support plate. Tighten bolts to 10 Nm (89 inch lbs.).
6. Parking brake return spring.
7. Cable to parking brake bracket.
8. Cable to actuator lever.
9. Tighten nut on equalizer to remove cable slack.
10. Brake rotor.
11. Tire and wheel.
12. Lower vehicle and adjust.