Headlamp Switch: Service and Repair

Description:

Remove or Disconnect
1. Cluster trim plate by unsnapping from instrument panel.
2. Screws from headlamp and fog lamp switch.
3. Headlamp and fog lamp switch by unsnapping from instrument panel.
4. Electrical connector.

Install or Connect

NOTICE Refer to Service Precautions.

1. Electrical connector.
2. Headlamp switch by snapping into instrument panel.
3. Screws to headlamp and fog lamp switch.

Tighten
^ Screws to 2 N.m (18 lb.in.).

4. Cluster trim plate by snapping into instrument panel.