Removal and Replacement

Description:

Remove or Disconnect
1. Open hood.
2. Pull up on headlamp retainers to release from locating tabs.
3. Slide headlamp out of slots in upper fascia support and fender reinforcement.
4. Electrical connector from headlamp.
5. Headlamp from vehicle.

Install or Connect
1. Headlamp to vehicle.
2. Electrical connector to headlamp.
3. Headlamp to body by inserting tabs of headlamp through holes in upper fascia support and fender reinforcement.
4. Slide retainers downward until fully seated.
5. Aim headlamps.
6. Close hood.