Adhesive Wheel Balance Weight Installation

Clean:
1. Wheel by sanding to bare aluminum where wheel balance weight is to be located.
2. Wipe wheel balance weight attachment area with a mixture of half Isopropyl alcohol and half water. A clean--cloth or paper towel must be used for this operation.
3. Dry the attachment area with hot air. Surface of wheel should be warm to the touch.
4. The adhesive backing on wheel balance weights must be warmed to room temperature.
5. Remove tape from back of weights. Do not touch the adhesive surface.
6. Apply wheel balance weight and press on with hand pressure.
7. Secure wheel balance weight with a 70 to 110 N (16 to 25 lb.) force applied with a roller.