Battery

Battery Hold Down Retainer Bolt/Screw* 12 N.m (106 lb. in.)
Battery Ground (Negative) Cable to Battery Negative Terminal Bolt/Screw 15 N.m (11 lb. ft.)
Battery Ground (Negative) Cable to Frame Rail Bolt/Screw 10 N.m (89 lb. in.)
Battery Ground (Negative) Cable to Transaxle Stud Nut 25 N.m (18 lb. ft.)
Battery (Positive) Cable to Battery Positive Terminal Bolt/Screw 15 N.m (11 lb. ft.)
Battery (positive) Cable to Electrical/Relay Center Nut 25 N.m (18 lb. ft.)
Electrical Center Nut to Shock Tower 3 N.m (27 lb. in.)
Front Wheelhouse Pine Extension (Battery Tray) Bolt/Screw 5 N.m (44 lb. in.)


*This fastener requires Locktite� GM P/N 12345382. Remove old Locktite (R) and replace with new before Inserting fastener. If replacing fastener use only GM P/N 11516735.