2-1 Manual Band Servo Disassemble

1. Remove the servo piston cylinder (114) from the servo cover (104).
2. Remove the O-ring seal (113) from the servo piston cylinder (114).
3. Remove the piston assembly (108), the servo piston spring (112), and the servo exhaust screen (115) from the cylinder (114).
4. Remove the servo piston seal (107) from the piston (108).
5. Use a small screwdriver in order to remove the snap ring (106) from the servo piston pin.
6. Remove the servo piston (108), the cushion spring (109), and the spring retainer (110) from the servo piston pin (111).