Flywheel Noise

NOTICE: Converter bolts that are too long may dimple the torque converter clutch apply surface and cause a shudder condition.

A loose or cracked flywheel will produce an irregular thud or click. To test for a loose or cracked flywheel, operate the vehicle at approximately 32 km/h (20 mph) and shut off the engine. If a thud is heard, the flywheel may be loose or damaged. This type of thud is loudest on deceleration. Loose torque converter-to-flywheel or flywheel-to-crankshaft bolts will sound similar to bearing knock. This condition produces several raps during quick acceleration on a free running engine. Depending on the idle smoothness, when the transaxle is in gear, the noise may or may not appear. Check the torque converter-to-flywheel and the flywheel-to-crankshaft bolts before aftempting to investigate any bearing-related knock.