Inlet Pipe

Heater Pipes:

Clamp Positions To Front Of Dash:

Heater Hoses:

Tools Required
J 38185 Hose Clamp Pliers
J 38723 Heater Line Quick Connect Separator

Remove or Disconnect

1. Drain cooling system.
2. Air cleaner and duct assembly.
3. Hose from inlet pipe.
4. Inlet pipe mounting bolt.
5. Inlet pipe from quick disconnect nipple.
6. Inlet pipe.

Install or Connect

1. Inlet pipe.
2. Inlet pipe to quick disconnect nipple.
3. Inlet pipe mounting bolt.

Tighten
^ Bolt to 7 N.m (62 lb. in.).

4. Hose to inlet pipe.
5. Air cleaner and duct assembly.
6. Refill cooling system.