Battery Hold Down Retainer Replacement

Battery Installation:

REMOVE OR DISCONNECT
1. Battery hold down retainer bolt/screw and nut. Clean old Locktite (R) off bolt/screw.
2. Battery hold down retainer.

INSTALL OR CONNECT

NOTE: Refer to Service Precautions.

1. Battery hold down retainer.
2. Battery hold down retainer bolt/screw and nut. Add Locktite (R) P/N 12345382 to bolt/screw.
Tighten
^ Bolt/screw to 12 N.m (106 lb. in.).