Control Valve Body Cover and Gaskets Disassemble

1. Position the transmission so that the cover of the control valve body is facing upward.
2. Remove the following parts:
^ On transmissions with a cast aluminum cover:
- 11 flanged bolts (52)
- 2 stud bolts (58)
- 4 TORX(R) bolts (57)
^ On transmissions with a stamped steel cover:
- 15 flanged bolts (52)
- 2 stud bolts (58)
- 6 nuts and washers (50 & 51)
3. Remove the control valve body cover (53).
4. Remove the inner (55) and the outer (54) gaskets from the control valve body cover. In some models, remove the seal (59).