Short Shaft

^ Tool Required:
- J 34757 Snap Ring Tool

REMOVE OR DISCONNECT
1. Case extension housing.
2. Output shaft retaining clip at differential.
3. Output shaft through left wheel opening.

INSTALL OR CONNECT

NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage to parts and systems.

1. Output shaft through left wheel opening.
2. Output shaft retaining clip at differential.
3. Case extension housing.