Mechanical Aiming Procedure (Alternate)

Composite Headlamp Adjustment Screen:

Composite Headlamp Aiming Mount:

Composite Headlamp Aim Setting:

Tool Required:
J 25300-A Headlamp Aiming Kit
1. Prepare vehicle.
2. The universal aimer should be used on a known level floor or calibrated for floor slope.
3. Select and assemble the universal adapter that fits the aiming pad pattern on the lens of the headlamp.
4. Move the adjustment rods to the number that agrees with the number located on the headlamp lens.
5. Attach adapters making certain that the correct adapter is used with the correct side aimer.
6. Place the aimers with adapters on to their respective sides making sure all adjustment rods are contacting the aiming pads. It may be necessary to add or remove an extension stud.
7. Aim headlamps according to the instructions included in J 25300-A headlamp aiming kit.