Camshaft, Engine

DIMENSIONS
Lobe Lift
Intake 9.0 mm (0.354 inch)
Exhaust 8.8 mm (0.356 inch)

Journal
Diameter No. 1 39.93-39-95 mm (1.5720-1.5728 inch)
Diameter No. 2-5 34.93-34.95 mm (1.3751-1.3760 inch)
Oil Clearance 0.050-0.110 mm (0.0019-0.0043 inch)
End Play Clearance 0.025-0.225 mm (0.0009-0.0088 inch)
Lobe Taper 0.046-0.083 mm (0.0018-0.0033 inch)
On Diameter in 14.0 mm (0.5512 inch)

TIGHTENING SPECIFICATIONS
Rear Cover (exhaust) 14 Nm (124 lb in)
Position Sensor Bolt 10 Nm (89 lb in)





Housing Bolts:
Tighten the camshaft housing bolts sequentially 15 Nm (11 lb ft) + 90 degrees.

Housing To
Fuel Pipe Bracket 15 Nm (11 lb ft) + 30°
Fuel Rail 26 Nm (19 lb ft)
Ignition Coil and Module Assembly 22 Nm (16 lb ft)