Dimension & Clearance Specifications - Cylinder Bore
DIMENSIONSCylinder Bore Diameter 89.994-90.006 mm (3.5110-3.5435 inch)
Out Of Round Max. 0.010 mm (0.0004 inch)
Taper Max. Top to 106 mm (4.173 inch) Down: 0.008 mm (0.0003 inch)
Runout Rear Face of Block to the Crankshaft Center Line Max.: 0.07 mm (0.002 inch)
TIGHTENING SPECIFICATIONS
Oil Passage Plugs
1/8 x 27 10 Nm (89 lb in)
3/8 x 18 30 Nm (22 lb ft)
1/4 x 18 20 Nm (15 lb ft)
Bolt 30 Nm (22 lb ft)