Operation CHARM: Car repair manuals for everyone.

Vehicle Damage Warnings


CAUTION:
- This vehicle is equipped with Supplemental Inflatable Restraint (SIR). Refer to CAUTIONS in the SIR Component and Wiring Location view in Air Bags and Seat Belts before performing service on or around SIR components or wiring. Failure to follow CAUTIONS could result in possible air bag deployment, personal Injury, or otherwise unneeded SIR system repairs.

- Before removing or Installing any electrical unit, or when a tool or equipment could easily come In contact with "live" exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or components. Unless instructed otherwise, the ignition switch must be in the "off" or "lock" position.


NOTE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for the application. General Motors will call out those fasteners that require a replacement after removal. General Motors will also call out the fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage to parts and systems.