Handling Electrostatic Discharge (ESD) Sensitive Parts

Proper Live Inflator Module Handling Procedures:

Remove or Disconnect

^ Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
^ Turn the ignition switch to "LOCK" and remove key.
1. 10 Amp AIR BAG fuse from I/P fuse block.
2. Left sound insulator.
3. Connector Position Assurance (CPA) clip and yellow 2-way connector at the base of the steering column.

Important
^ With the AIR BAG fuse removed and ignition switch "ON" the "AIR BAG" warning lamp will be "ON". This is normal operation and does not indicate an SIR system malfunction.

Install or Connect

^ Turn ignition switch to "LOCK" and remove key.
1. Yellow 2-way connector and connector Position Assurance (CPA) clip at the base of the steering column.
2. Left sound insulator.
3. AIR BAG fuse to I/P fuse block.
^ Turn ignition switch to "RUN" and verify that the "AIR BAG" warning lamp flashes seven times and then turns "OFF".