Park Lock Cable
Remove or Disconnect1. AIR BAG fuse.
2. Open access door and disconnect Yellow two way AIR BAG wire.
3. Tilt lever with locking pliers and protective covering.
4. Column shift boot (1 snap).
5. Upper and lower front Steering column covers (5 screws).
6. Steering column filler panel (3 screws).
7. BTSI solenoid (2 screws) and position aside.
8. Park/Lock cable (unsnap from both sides).
Install or Connect
1. Park/Lock cable (snap on both sides).
2. BTSI solenoid (2 screws).
3. Steering column filler panel (3 screws).
4. Upper and lower front Steering column covers (5 screws).
5. Column shift boot (1 snap).
6. Tilt lever with locking pliers and protective covering.
7. Connect Yellow two way AIR BAG wire and close access door.
8. AIR BAG fuse.