Shift Lever

Column Shift Lever:

Remove or Disconnect

1. AIR BAG fuse.
2. Open access door and disconnect Yellow two way AIR BAG wire.
3. Tilt lever with locking pliers and protective covering.
4. Column shift boot (1 snap).
5. Upper and lower front Steering column covers (5) screws.
6. Linear shift lever assembly (# 3 torx(R) screws).

Install or Connect

1. Linear shift lever assembly (# 3 torx(R) screws).
2. Upper and lower front Steering column covers (5) screws.
3. Column shift boot (1 snap).
4. Tilt lever with locking pliers and protective covering.
5. Connect Yellow two way AIR BAG wire and close access door.
6. AIR BAG fuse.